Anesthesia Accessories for SomnoFlo®
2-Accessory Connector
For the SomnoFlo® and SomnoSuite® anesthesia systems
The 2-Accessory Connector allows you to direct anesthetic output to 2 animals or two devices (e.g., nose cone and induction chamber). Total tubing length for SomnoSuite® is 18″. Total tubing length for SomnoFlo® is 26″.
3 Accessory Connector
Directs airflow to three accessories, e.g. induction chamber, intubation stand, and ventilator.
10-1000-185 – Total tubing length is 20″
10-8000-185 – Total tubing length is 29″
AC Adapters and Power Cords
12v AC adapter for use with:
- SomnoSuite®
- SomnoFlo®
- RoVent®
- RoVent® Jr
- PhysioSuite®
- MouseSTAT® Jr
- RightTemp® Jr
- CODA® Monitor
- FIR Warming
18v AC adapter for use with:
Anesthesia Masks Breathing Circuits for SomnoSuite® and SomnoFlo®
For the SomnoSuite® and SomnoFlo® Anesthesia Systems
Rodent face masks are made from clear acrylic and fit all non-rebreathing systems. The diaphragms on these masks seal the mask around the face of the rodent and reduce the amount of anesthetic gases that may leak into the room.
All masks include extra diaphragm material. Standard tubing length is 18″. Please let us know the required tubing length for your MRI applications when ordering.
Need replacement diaphragms? Buy them here.
A surgical plane of anesthetic depth is often defined by the loss of pedal reflex and confirmed by applying a stimulus to the paw pad. This anesthetic depth indicator is a sensory evaluator that standardizes common “toe-pinch” methods and is a good indicator of adequate anesthetic depth prior to surgery or other procedures.
Canister tubing assembly for use with the SomnoFlo®
Holder for use with Activated Charcoal Absorption Filters
Low Cost Chambers
For the SomnoSuite® and SomnoFlo® anesthesia systems
New, low-cost induction chambers are sized specifically for mice and rats.
Each chamber includes tubing to connect to the inlet and outlet of your low-flow electronic vaporizer. The length of the tubing is 12″.
Low-Profile Anesthesia Masks for Mice and Rats
For the SomnoSuite® and SomnoFlo® anesthesia systems
Low-profile anesthesia masks for use with SomnoSuite® and SomnoFlo® anesthesia systems. Designed for a tight fit with mice and rats, these masks are ideal for procedures that require access to the eyes and head while helping minimize the possibility of waste gas leaks.
Each kit includes one mouse nose mask and one 18-inch tubing set with luer fittings for Kent low-flow electronic vaporizers. Available in multiple sizes for different animal weights. Need longer tubing? Contact our Sales team for a quote.
• Tight fit for mice and rats
• Ideal for procedures involving access to the eyes and head
• Includes nose mask and 18 in tubing set with luer fittings
• MRI compatible
Choose your option below.
Oxygen Concentrator for Small Animal Anesthesia - 5 LPM
Oxygen concentrator designed to provide a continuous oxygen source for small animal anesthesia and laboratory procedure workflows. The Pureline® Portable Oxygen Concentrator is a lightweight, continuous flow oxygen regulator used to deliver up to 5 LPM of 92–95% pure oxygen, making it a practical fit for research settings where a compact, dedicated oxygen supply is needed at the anesthesia station.
It easily interfaces with SomnoFlo®, SomnoSuite®, and VetFlo™ systems, supporting rodent anesthesia workflows and other compatible small animal procedure setups. Pureline® is a registered trademark.
• Continuous flow oxygen delivery
• Up to 5 LPM of 92–95% pure oxygen
• Lightweight portable format
• Easily interfaces with SomnoFlo®, SomnoSuite®, and VetFlo™ systems
Choose your option below.
You can find the manual for this item here.
SomnoFlo® and SomnoSuite® Oxygen Concentrator setup
