Logo for Kent Scientific

Aeroneb® Lab Control Module

Aeroneb Lab Control Module

The Aeroneb® Lab Micropump Nebulizer uses a high-efficiency aerosolization technology for use in pre-clinical aerosol research and inhalation studies, providing a valuable link between pre-clinical and clinical product development.

Using Aerogen’s OnQ Aerosol Generator, the Aeroneb® Lab is designed to produce a highly respirable aerosol of virtually any drug in liquid. It produces a fine droplet, low-velocity aerosol without compressed air, and integrates easily into existing exposure and aerosol testing equipment.

Aeroneb® is a registered trademark of Nektar Therapeutics.

Your Price
Save for later


Nebulizer Unit Dimensions: 50 mm W x 45 mm H x 50 mm D
Control Module Dimensions: 75 mm W x 33 mm H x 131 mm D
Control Module Cable: 1.8 m long
Nebulizer Unit Weight: 25 g nebulizer unit and filler cap
Control Module Weight: 178 g, including cable
Nebulizer Unit Capacity: Maximum 10 ml
Power Source: Can operate from AC/DC adapter (input 100 to 240 VAC 50 to 60 Hz, output 9V) OR an external 9V DC power supply Power Consumption: <2.57 watts
Power Consumption: <2.57 watts


  • Produces a high-quality respirable aerosol with extremely low residual volume
  • Aerosolizes a broad range of liquid formulations without altering or damaging the compound’s molecular integrity
  • Utilizes the same OnQ™ technology used in two commercially available nebulizer products, providing a bridge from preclinical to clinical studies
  • Includes a universal adapter, good from 100V to 240V
  • Nebulizer and components are latex free
  • Note: The nebulizer delivery system requires the use of a flow regulated air source such as a pump or compressed gas source (not included) to move the aerosol through the tubing towards the animal.

Nebulizer Unit Options:

Nebulizer Unit, SmallAeroneb® Lab Nebulizer Unit, Small VMD

  • Flow rate: >0.1 mL/min
  • Particle size: VMD between 2.5 – 4.0 µm
  • Residual volume: <0.2 mL

Nebulizer unit, standardAeroneb® Lab Nebulizer Unit, Standard VMD

  • Flow rate: >0.3 mL/min
  • Particle size: VMD between 4.0 – 6.0 µm
  • Residual volume: <0.2 mL


View All Product Reviews