Anesthesia Accessories
2-Accessory Connector
For the SomnoFlo® and SomnoSuite® anesthesia systems
The 2-Accessory Connector allows you to direct anesthetic output to 2 animals or two devices (e.g., nose cone and induction chamber). Total tubing length for SomnoSuite® is 18″. Total tubing length for SomnoFlo® is 26″.
3 Accessory Connector
Directs airflow to three accessories, e.g. induction chamber, intubation stand, and ventilator.
10-1000-185 – Total tubing length is 20″
10-8000-185 – Total tubing length is 29″
AC Adapters and Power Cords
12v AC adapter for use with:
- SomnoSuite®
- SomnoFlo®
- RoVent®
- RoVent® Jr
- PhysioSuite®
- MouseSTAT® Jr
- RightTemp® Jr
- CODA® Monitor
- FIR Warming
18v AC adapter for use with:
Activated Charcoal Absorption Filters
For SomnoSuite® and VetFlo™ systems
Capture unused and exhaled anesthetic.
For canister holders, visit our holder for activated charcoal absorption filter page.
Anesthesia Masks Breathing Circuits for SomnoSuite®
For the SomnoSuite® and SomnoFlo® Anesthesia Systems
Rodent face masks are made from clear acrylic and fit all non-rebreathing systems. The diaphragms on these masks seal the mask around the face of the rodent and reduce the amount of anesthetic gases that may leak into the room.
All masks include extra diaphragm material. Standard tubing length is 18″. Please let us know the required tubing length for your MRI applications when ordering.
Need replacement diaphragms? Buy them here.
Anesthesia Masks Breathing Circuits for Traditional Vaporizers
Rodent face masks are made from clear acrylic and fit all non-rebreathing systems. The diaphragms on these masks seal the mask around the face of the rodent and reduce the amount of anesthetic gases that may leak into the room.
All masks include extra diaphragm material. Standard tubing length is 36″. Please let us know the required tubing length for your MRI applications when ordering.
The VetFlo™ reorder codes previously had an ACV prefix. The products remain the same, only the reorder codes were changed.
Need replacement diaphragms? Buy them here.
A surgical plane of anesthetic depth is often defined by the loss of pedal reflex and confirmed by applying a stimulus to the paw pad. This anesthetic depth indicator is a sensory evaluator that standardizes common “toe-pinch” methods and is a good indicator of adequate anesthetic depth prior to surgery or other procedures.
Anti-Spill Device for Funnel Filled Anesthesia Vaporizers
Anti-spill device for funnel filled anesthesia vaporizers used with VetFlo™ Anesthesia Systems. Designed to help support cleaner anesthetic filling workflows in laboratory animal research settings, this accessory is available for either isoflurane or sevoflurane vaporizers.
A practical fit for labs using funnel filled vaporizer systems for small animal anesthesia.
• For use with all VetFlo™ Anesthesia Systems
• Available for isoflurane and sevoflurane vaporizers
• Helps support cleaner filling workflows
Choose your option below.
Anti-Spill, Anti-Vapor Bottle Top Adapter for Anesthesia Systems
For the SomnoSuite® anesthesia system
Anti-spill, anti-vapor bottle top adapter for the SomnoSuite® anesthesia system. Designed to support safer, cleaner anesthetic handling during filling, this adapter helps reduce spills and vapor release. It also supports the filling of gas-tight syringes for the SomnoFlo system in small animal anesthesia workflows.
Adapters for isoflurane and sevoflurane are available.
• Supports the filling of gas-tight syringes for the SomnoSuite® anesthesia system
• Helps reduce spills and vapor release during filling
• Available for isoflurane or sevoflurane
Choose your option below.
Canister tubing assembly for use with the SomnoFlo®