Anesthesia Accessories for SomnoSuite®
2-Accessory Connector
For the SomnoFlo® and SomnoSuite® anesthesia systems
The 2-Accessory Connector allows you to direct anesthetic output to 2 animals or two devices (e.g., nose cone and induction chamber). Total tubing length for SomnoSuite® is 18″. Total tubing length for SomnoFlo® is 26″.
3 Accessory Connector
Directs airflow to three accessories, e.g. induction chamber, intubation stand, and ventilator.
10-1000-185 – Total tubing length is 20″
10-8000-185 – Total tubing length is 29″
AC Adapters and Power Cords
12v AC adapter for use with:
- SomnoSuite®
- SomnoFlo®
- RoVent®
- RoVent® Jr
- PhysioSuite®
- MouseSTAT® Jr
- RightTemp® Jr
- CODA® Monitor
- FIR Warming
18v AC adapter for use with:
A surgical plane of anesthetic depth is often defined by the loss of pedal reflex and confirmed by applying a stimulus to the paw pad. This anesthetic depth indicator is a sensory evaluator that standardizes common “toe-pinch” methods and is a good indicator of adequate anesthetic depth prior to surgery or other procedures.
Anti-Spill, Anti-Vapor Bottle Top Adapter for Anesthesia Systems
For the SomnoSuite® anesthesia system
Anti-spill, anti-vapor bottle top adapter for the SomnoSuite® anesthesia system. Designed to support safer, cleaner anesthetic handling during filling, this adapter helps reduce spills and vapor release. It also supports the filling of gas-tight syringes for the SomnoFlo system in small animal anesthesia workflows.
Adapters for isoflurane and sevoflurane are available.
• Supports the filling of gas-tight syringes for the SomnoSuite® anesthesia system
• Helps reduce spills and vapor release during filling
• Available for isoflurane or sevoflurane
Choose your option below.
Glass Syringe, 10 mL
For the SomnoSuite® anesthesia system
Kent Scientific recommends the smallest syringe size that will accommodate the duration of your application. Using a large syringe size with very low flow rates can cause uneven anesthetic delivery.
- 10 mL size for use with rats
Glass Syringe, 5 mL
For the SomnoSuite® anesthesia system
Kent Scientific recommends the smallest syringe size that will accommodate the duration of your application. Using a large syringe size with very low flow rates can cause uneven anesthetic delivery.
5 mL size for use with mice
Holder for use with Activated Charcoal Absorption Filters
Oxygen Concentrator for Small Animal Anesthesia - 5 LPM
Oxygen concentrator designed to provide a continuous oxygen source for small animal anesthesia and laboratory procedure workflows. The Pureline® Portable Oxygen Concentrator is a lightweight, continuous flow oxygen regulator used to deliver up to 5 LPM of 92–95% pure oxygen, making it a practical fit for research settings where a compact, dedicated oxygen supply is needed at the anesthesia station.
It easily interfaces with SomnoFlo®, SomnoSuite®, and VetFlo™ systems, supporting rodent anesthesia workflows and other compatible small animal procedure setups. Pureline® is a registered trademark.
• Continuous flow oxygen delivery
• Up to 5 LPM of 92–95% pure oxygen
• Lightweight portable format
• Easily interfaces with SomnoFlo®, SomnoSuite®, and VetFlo™ systems
Choose your option below.
You can find the manual for this item here.
Preset Pressure Reducer
For the SomnoSuite® and SomnoFlo® anesthesia systems that use compressed gas
SomnoFlo® Low-Flow vaporizers accept a maximum compressed gas pressure of 15 psi. If your compressed gas source exceeds 15 psi, a preset pressure reducer is required. The Preset Pressure Reducer can reduce the incoming pressure to the vaporizer from as high as 100 psi down to 15 psi. Includes 12″ tubing and connectors and 10′ high pressure oxygen hose with DISS fitting.