Anesthesia Accessories for VetFlo™
Activated Charcoal Absorption Filters
For SomnoSuite® and VetFlo™ systems
Capture unused and exhaled anesthetic.
For canister holders, visit our holder for activated charcoal absorption filter page.
Anesthesia Masks Breathing Circuits for Traditional Vaporizers
Rodent face masks are made from clear acrylic and fit all non-rebreathing systems. The diaphragms on these masks seal the mask around the face of the rodent and reduce the amount of anesthetic gases that may leak into the room.
All masks include extra diaphragm material. Standard tubing length is 36″. Please let us know the required tubing length for your MRI applications when ordering.
The VetFlo™ reorder codes previously had an ACV prefix. The products remain the same, only the reorder codes were changed.
Need replacement diaphragms? Buy them here.
Anti-Spill Device for Funnel Filled Anesthesia Vaporizers
Anti-spill device for funnel filled anesthesia vaporizers used with VetFlo™ Anesthesia Systems. Designed to help support cleaner anesthetic filling workflows in laboratory animal research settings, this accessory is available for either isoflurane or sevoflurane vaporizers.
A practical fit for labs using funnel filled vaporizer systems for small animal anesthesia.
• For use with all VetFlo™ Anesthesia Systems
• Available for isoflurane and sevoflurane vaporizers
• Helps support cleaner filling workflows
Choose your option below.
Isoflurane Funnel Filled Vaporizer for Rodent Anesthesia
Isoflurane funnel filled vaporizer designed for rodent anesthesia in laboratory research settings. This Tec 3 vaporizer supports controlled anesthetic delivery for small animal procedures and is a practical fit for labs using isoflurane as part of a dedicated rodent anesthesia workflow.
Designed for use with a compatible VetFlo™ anesthesia stand, sold separately, this vaporizer is available in standard and extra-capacity formats to support different procedure needs.
• Tec 3 vaporizer design
• Funnel filled for isoflurane use
• Designed for rodent anesthesia workflows
• Compatible with VetFlo™ anesthesia stands
• Available in 125 mL and 250 mL capacities
Choose your option below.
Isoflurane key filled vaporizer designed for rodent anesthesia in laboratory research settings. This Tec 3 vaporizer supports controlled anesthetic delivery for small animal procedures and is a practical fit for labs that prefer a key filled vaporizer as part of their rodent anesthesia setup.
Designed for use with a compatible VetFlo™ anesthesia stand, sold separately, this vaporizer helps support consistent isoflurane delivery during routine laboratory animal procedures.
• Tec 3 vaporizer design
• Key filled for isoflurane use
• Designed for rodent anesthesia workflows
• Compatible with VetFlo™ anesthesia stands
Low Cost Chambers for Traditional Vaporizers
New, low-cost induction chambers are sized specifically for mice and rats.
Each chamber includes tubing to connect to the inlet and outlet of your vaporizer. The length of the VetFlo™ tubing is 30″.
Low Profile Anesthesia Masks for Traditional Vaporizers
Ideal for procedures involving access to eyes and head. Anesthesia masks are designed for a tight fit when used with mice and rats.
Each kit includes 1 nose mask and one 36″ tubing set with luer fittings for VetFlo™ Vaporizer.
Need longer tubing? Contact our Sales team for a quote.
Oxygen Concentrator for Small Animal Anesthesia - 5 LPM
Oxygen concentrator designed to provide a continuous oxygen source for small animal anesthesia and laboratory procedure workflows. The Pureline® Portable Oxygen Concentrator is a lightweight, continuous flow oxygen regulator used to deliver up to 5 LPM of 92–95% pure oxygen, making it a practical fit for research settings where a compact, dedicated oxygen supply is needed at the anesthesia station.
It easily interfaces with SomnoFlo®, SomnoSuite®, and VetFlo™ systems, supporting rodent anesthesia workflows and other compatible small animal procedure setups. Pureline® is a registered trademark.
• Continuous flow oxygen delivery
• Up to 5 LPM of 92–95% pure oxygen
• Lightweight portable format
• Easily interfaces with SomnoFlo®, SomnoSuite®, and VetFlo™ systems
Choose your option below.
You can find the manual for this item here.
Sevoflurane key filled vaporizer designed for rodent anesthesia in laboratory research settings. This Tec 3 vaporizer supports controlled sevoflurane delivery for small animal procedures and is a practical fit for research labs using sevoflurane as part of a dedicated rodent anesthesia setup.
Designed for use with a compatible VetFlo™ anesthesia stand, sold separately, this vaporizer helps support consistent anesthetic delivery during routine laboratory animal procedures.
• Tec 3 vaporizer design
• Key filled for sevoflurane use
• Designed for rodent anesthesia workflows
• Compatible with VetFlo™ anesthesia stands
Sliding Top Chambers for Traditional Vaporizers
The Sliding Top Chambers are for use with passive waste anesthesia gas management systems and feature positive sliding tops that make them leak proof when in use.
Tubing and adapters included. The fresh and waste anesthetic gas inlet and outlet adapters are industry standard 15 mm i.d. x 19 mm o.d., standard 19 mm EVAC tubing will fit with either adapter. Tubing is 32″ long.
The VetFlo™ reorder codes previously had an ACV prefix. The products remain the same, only the reorder codes were changed.